Perfect for sticking pips out top sheets to a blade without the use of messy glues. The glue sheet itself is white, good for translucent topsheets to prevent bleed through of wood grains or logo. Even works on black blades! Roughly 7 1/2″x7 1/2″ in size
- Remove white release paper and stick to blade.
- Cut to fit blade.
- Remove gold release paper and install your top sheet.
- NOTE: This glue sheet is very aggressive; this allows it to actually hold your top sheet on the blade. The best way to remove ANY glue sheet is with heat. To remove simply take the top sheet off the blade then cover the glue sheet back over with a piece of printer paper, take a household iron on DRY HOT setting and apply to the paper, this will break the glue bond. If you simply start pulling on any glue sheet you are bound to splinter your bat.
| Weight | .2 lbs |
|---|
4 reviews for Double Sided Glue Sheet
Only logged in customers who have purchased this product may leave a review.
Related products
Accessories
$1.00
Accessories
$23.00
Accessories
Price range: $1.00 through $10.00
Accessories
$15.00
Accessories
$7.00
Scottie –
Sorry but this was to sticky. Make sure your blade is WELL SEALED. I prepared both sides of my near new blade with two to light coats of polyurethane. ( perhaps to light?)
One one side I applied a glue sheet that came with a sheet of Meteorite the other side with a sheet of wbgs and Geospin. after about 3 months I went to remove the rubbers and absolutely could not dislodge the wbgs glue sheet from the blade. The other glue sheet readily pulled off. By Zeropong: First thank you for your honest review, if your blade is not sealed you can still get glue sheets off with NO problems, Just take the rubber off then place a paper over the glue sheet, heat it up with a household iron and the glue bond will break every time with no damage to your blade!
Lawrence Bone –
FINALLY!!!! A glue sheet that sticks hardbat rubber like… well…. like GLUE!!!! I was so absolutely sick to death of my rubber… Gambler Peacekeeper to be exact… peeling off the edges of my blades the day I installed them by glue… or by \”other\” glue sheets. This stuff WORKS!!!!! THANK YOU ZEROPONG!!!!!
Tu mai –
This is the best product ever! Installing rubber couldn’t be quicker…I use to have to wait half a day glueing my ruber…now its done in seconds…best of all is the price…thanx Zeropong!
Preppy –
These glue sheets are very easy and fast to install, they work well but the glue is very hard to remove when you want to change your rubbers.